Productos


Noticias

IES-A1080/A1062 Series - Comunicaciones Industriales

Industrial C1D2/ATEX 8-port unmanaged Ethernet switch
Key Features
ŒŒ

IES-A1080/A1062 series are unmanaged Ethernet switches with 6x10/100Base-T(X) and 2x100Base-FX, 10/100/1000Base-T(X), 1000Base-SX or 1000Base-LX ports which is specifically designed for the C1D2/ATEX certified with hazardous locations requirement. IES-A1080/A1062 series support redundant power input and surge protection. The wide operating temperature range from -40 to 70°C and C1D2/ATEX certified can satisfy most of harsh or hazardous locations operating environments.

Physical Ports
ŒŒ - 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX: 8

ŒŒ Technology
- Ethernet Standards: IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.3z for 1000Base-X, IEEE 802.3x for Flow control
ŒŒ - MAC Table 8192 MAC addresses
ŒŒ - Processing Store-and-Forward

LED Indicators
ŒŒ - Power Indicator Green : Power LED x 3
ŒŒ - Fault Indicator Amber : Indicates PWR1 or PWR2 failure occurred
ŒŒ - 10/100Base-FX RJ45 Port Indicator Green for port Link/Act. Amber for Duplex/Collision
- 10/100/1000Base-T(X) / Fiber Port Indicator Green for port Link/Act. Amber for Link

Power
- Redundant Input Power Triple DC inputs: Dual 12~48VDC on 7-pin terminal block, One 12~48VDC on power jack (power jack cannot use in hazardous location application)
- Power Consumption (Typ.) 4 Watts 7, Watts, 8 Watts, 6 Watts, 6 Watts
- Overload Current Protection Present
- Reverse Polarity Protection Present on terminal block

Physical Characteristics
- Enclosure IP-30
- Dimensions (W x D x H) 52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
- Weight (g)666, g677, g680, g680, g685, g685

Environmental
-ŒŒ Storage Temperature -40 to 85°C (-40 to 185°F)
-ŒŒ Operating Temperature -40 to 70°C (-40 to 158°F)
-ŒŒ Operating Humidity 5% to 95% Non-condensing

Regulatory Approvals
-ŒŒ EMI FCC Part 15, CISPR (EN55022) class A
-ŒŒ EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
-ŒŒ Shock IEC60068-2-27
-ŒŒ Free Fall IEC60068-2-32
-ŒŒ Vibration IEC60068-2-6
-ŒŒ Safety EN60950, UL508 (E331061), UL/cUL Class 1 Division 2 Group A/B/C/D, ATEX Class 1 Zone 2
-ŒŒ Warranty 5 years

Available Model
- IES-A1080 Industrial C1D2/ATEX 8-port slim type unmanaged Ethernet switch with 8x10/100Base-T(X)
- IES-A1062GT Industrial C1D2/ATEX 8-port unmanaged Ethernet switch with 6x10/100Base-T(X) and 2x10/100/1000Base-T(X)
- IES-A1062FX-MM-SC Industrial C1D2/ATEX 8-port unmanaged Ethernet switch with 6x10/100Base-T(X) and 2x100Base-FX, multi-mode, 2Km/1310nm, SC connector
- IES-A1062FX-SS-SC Industrial C1D2/ATEX 8-port unmanaged Ethernet switch with 6x10/100Base-T(X) and 2x100Base-FX, single-mode, 30Km/1310nm, SC connector
- IES-A1062GF-MM-SC Industrial C1D2/ATEX 8-port unmanaged Ethernet switch with 6x10/100Base-T(X) and 2x1000Base-SX, multi-mode, 550m/850nm,SC connector
- IES-A1062GF-SS-SC Industrial C1D2/ATEX 8-port unmanaged Ethernet switch with 6x10/100Base-T(X) and 2x1000Base-LX, single-mode, 10Km/1310nm, SC connector